DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

I wanted to have the factory hitch for my Bronco, but that was not an option. I have gotten all the parts separately and have a complete OEM solution for adding the factory tow package to my 4 door First Edition. I have everything installed and have been able to configure it in Forscan to have no error codes and everything works!

While I did take my time, it was relatively easy (aside from figuring out how panels pop off without breaking).

So here is my little write up, hope it helps...

DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)