Can anyone confirm what voltages reading (range)should be feeding into the brake controller.
My assumption is/ was that it should be between 0v-13.8v ish (nominal system battery voltage) depending on the position of the brake pedal.
When I measure between ground and pin12 (violet/white) with a meter it reads 0v or13.8v. (on/ off)
nothing in between.
I pulled up the reported value on forscan, and the vehicle does see the brake pedal varied position, the voltage output though does not...
Electric Brake Controller Input
My assumption is/ was that it should be between 0v-13.8v ish (nominal system battery voltage) depending on the position of the brake pedal.
When I measure between ground and pin12 (violet/white) with a meter it reads 0v or13.8v. (on/ off)
nothing in between.
I pulled up the reported value on forscan, and the vehicle does see the brake pedal varied position, the voltage output though does not...
Electric Brake Controller Input